-
Description
<How to use> *For details, please read the instructions on the back before use.
●When stamping: With the lid still on, press the stamp vertically onto a flat surface several times to apply ink to the imprint. Remove the lid and press lightly onto the paper to make the design come out nicely.
●When changing the design: Pop off the lid (semi-transparent part) and turn the dial to change the design.
●When refilling the ink: Pinch both ends of the ink pad and pull it out from the lid. Allow the special refill ink to soak into the entire pad and let it soak for 2-3 minutes. Click here
for the separately sold "special refill ink" >>
Contents 1 x Rotary Stamp (8 designs)
with ink pad
size Package size: H150 x W100 x D43mm
Product size: H87 x W44 x D42mm
material Body: ABS+POM+polycarbonate+steel Printing
surface: rubber
Ink pad: oil-based pigment black ink: ABS+urethane
country of origin MADE IN CHINA
please note ●Keep out of reach of children under 6 years of age.
●If the ink gets into your eyes or touches your mouth, immediately rinse with tap water and consult a doctor.
Before Use 〇Read the instructions on the back and set the included ink into the main body.
〇Please try pressing it several times before use.
〇Press on a flat surface.
〇If you press too hard, too much ink will come out and the lines will become thick.
〇If you will not be using the stamp for a long period of time, remove the ink pad from the main body and store it with the lid on the ink pad.
〇Since it uses oil-based ink, be careful not to let it adhere to clothing, etc.
〇Depending on the material of the paper you are stamping on, the ink may dry slowly or bleed. 〇Do
not rub the rubber part of the stamp surface with your fingers or sharp objects as this may cause damage.
〇Do not place it near a fire or in a high temperature place (in a car in summer or in direct sunlight).
〇If the ink becomes thin, use the separately sold "Special refill ink black"
